At the time of writing, this remote only works with macOS versions up to and including macOS 11.
The Wii Remote is Bluetooth-based, offers high responsiveness and reliability. Its built-in motion and IR sensors enable the IR mouse mode also supported by Remote Buddy 2.
This page is exclusively about the original Wii Remote. For information on the successor, with "Wii MotionPlus inside" printed on the front, please see this page.
Remote Buddy 2 can use the IR camera built into the front of the Wii Remote to implement a virtual mouse that can be moved by pointing the Wii Remote itself to a different position. The IR Mouse Mode works by tracking the position of IR light sources - usually supplied by a Wireless Wii Sensor Bar located on top or below the display use with the Mac. A Wireless Wii Sensor Bar is physically required for using the IR Mouse Mode. If, however, you just want to use the buttons of the Wii Remote with Remote Buddy 2, you do not need a Wireless Wii Sensor Bar.
The Wii Sensor Bar emits the IR light required by the IR camera ("sensor") inside the Wii Remote itself. The Sensor Bar - unlike its name suggests - does not contain any receiver or sensors at all. It consists of a simple array of IR light sources (and thus the physically exact opposite of a sensor). These IR light sources are seen by the IR camera located at the front of the Wii Remote. Their location is then sent to Remote Buddy 2 via Bluetooth. Remote Buddy 2 uses this data to track the location of the IR light sources. From this, it calculates the position of the Wii Remote and places the mouse cursor at the respective position on your screen.
It's important to keep in mind that the Wii Remote was designed as a game controller. It's filled with high tech and has to maintain a Blueooth connection when in use. All of this of course consumes power, so that, depending on which hardware features you use, battery life of the remote can greatly vary and is generally not comparable with that of other remote controls. Remote Buddy 2's Bluetooth power saving options can help you increase battery life (slightly or significantly - depending on your use pattern). They can be found at Prefs > Hardware.
|Maximum OS||macOS 11|